ZZ-1000 High Vacuum Double-Chamber Roll Coating System

高真空雙室連續鍍膜機

簡介

        GDM-1000CZ高真空雙室連續鍍膜機，主要用於在聚脂薄膜或紙 (含水率3%) 的表面蒸鍍金屬膜層，在高真空狀態下，連續加熱鋁，使金屬鋁分子不斷地蒸發到連續送進的基體材料表面，形成牢固的薄膜，所鍍的金屬薄膜在導電性、透明度、對可見光紫外線和紅外線的吸收性、反射性及純粹的裝飾性中都具有良好的特性，是裝璜、紡織、包裝、印刷、無線電及太陽能利用等行業的理想材料。

主要技術性能規範

蒸發金屬:    鋁

卷膜條件:

    基體材料: 聚脂薄膜、紙 (含水率 3%)

    最大寬度(毫米):             500

    最大卷徑(毫米):           f 250

    卷心直徑(毫米):             f 80

真空室尺寸(毫米), (直徑 x 長度):    f1000 x 1100

真空室:

    二次抽氣時間(空載):    上室(托) 1 x 10^-3

                                            下室(托) 5 x 10^-3

   

    極限真空(空載):      上室(托)   15分鐘達 5 x 10^-3

                                      下室(托)   15分鐘達 5 x 10^-4

卷繞控制方法:    0.6公斤一米    力矩電機

卷繞軸只數:        6

最高卷繞速度 (米 / 分 ):    < 60

蒸發器:

    石墨坩堝只數:                 3

    每只功率 (千瓦):             10

    送絲速度 (米 / 分):          0.5 ~ 5.5

最大耗用功率真(三相) ,(千瓦):    70

佔地面積(米) ,(長 x 寬 x 高):    3.9 x 4.2 x 2.6

Brief Introdution

        Model GDM-1000 CZ is mainly applied to evaporating metal layer on the surfaces of polyester film or paper (moisture content 3%). Under high vacuum condition, the aluminium is continuosly heated so that the aluminium molecules are unceasingly evaporized onto the surface of the substrate materials which is being delivered continuosly and firmly form a thin film. The metal film. The metal film thus prepared is excellently characterized with electric conductivity, transparency, absorptivity of visible lighe as ultraviolet ray and infrared ray, reflexing and pure decoration, being an ideal material for the professions of decoration, textile, packing, printing, radio and solat-energy ultilization.

        Having a wide range of application, this model can evaporate metals not only on polyester film, but also on papers, with high working effeciency.

        The double-chamber structure guarantees the vacuum of the lower chamber and also can prevent the heat radiation and the remaining aluminium molecules from diffusing to the upper chamber.

        Except the gas evolving valve, the other valves are all gas controlled, the structure being reliable and of easy operation.

　

Main Technical Specification

(1)    Vacuum Chamber:         f1000 x 1100mm

(2)    Ultimate Vacuum:           Upper Chamber 1 x 10-3 Torr; Lower Chamber 5 x 10-5 Torr

(3)    Twice Pumping Time:    Upper 5 x 10-3 within 15 min; Lower 5 x 10-4 within 15 min

(4)    Evaporating Material:    Aluminium

　

(5)    Substrate Material:              Polyester, Paper (moisture content 3%)

        Maximum Width:                 500mm

        Maximum Roll Diameter:   f250mm

        Diameter of the Roller:        f80mm

　

(6)    Roll Control:                                       0.6 kg/ M Momental motor

(7)    Number of Rollers:                              6

(8)    Maximum Rolling Speed:                     < 60 M/min

(9)    Number of Crucible:                            3, each of 10 kW, speed of 0.5 ~ 5.5 M.min

(10)    Maximum Power Consumption:         Three Phases, 70 kW

(11)    Overall Dimensions:    L x W x H      3.9 x 4.2 x 2.6 M